LTP Ironwax Gloss 1L

PRICE £18.62

LTP Ironwax Gloss is a low maintenance, self-shine gloss finish, film forming acrylic sealer. It enhances colour and texture on stone floors, protects against staining and stubborn dirt, and is easy to maintain. LTP Ironwax Gloss is suitable for domestic and commercial use, but for interiors only. It is not suitable for wet rooms or shower enclosures. LTP Ironwax Gloss is suitable for use on most natural stones including travertine, slate, limestone, sandstone, brick, terracotta, unpolished marble, porous quarries, terrazzo and concrete.

Directions for use:
Ensure surface to be treated is completely clean, dry (min 24hrs). Any retained moisture may cause the product to dry opaque or prevent the seal from reaching full hardness. Pour contents into a separate container.

Rough cut, textured or riven surfaces Use a sponge or paint brush, apply a thin coat evenly in one direction. Do not rub or buff. Allow to dry (1 hr). Apply until an evenly thin film is created. (Avg. 3 times). For a higher sheen further coats should be applied at right angles to the previous (max.6).

Honed and smooth surfaces apply using a J cloth or sealant applicator pad. Apply a thin coat evenly to the surface without rubbing. Apply until an evenly thin film is created (avg. 3 times). Allow to dry (1 hr). For a higher sheen further coats should be applied at right angles to the first (max.6).

Do not over apply as too many coats may cause unsightly build up and/or reduce the efficiency of the product. Hardens after about an hour but will take a further three days to achieve full hardness and become fully water resistant.

Avoid shaking the bottle prior to use. Frothing of liquid may lead to an inconsistent finish. Avoid extremes of temperature. LTP Ironwax Gloss may not properly adhere to highly vitrified quarry tiles or ceramics.